Oct 21st 2019 Video going over the different parts and functions of the FX Airguns Bottle AMP Regulator. The Bottle AMP Regulator is found in late model Impact X (Gen 3), all Impact MKII's (Gen 4), Crowns (Gen 2 and *current* Gen 3), and the Dreamline Bottle Adapter. This video discusses the purposes of the different o-rings, explaining which ones can cause a leak, and which ones cause regulator creep. For more information about the parts or o-ring sizes, please view the schematics linked below: Impact X: https://fxairguns.com/wp-content/uplo... Impact MKII: https://fxairguns.com/wp-content/uplo... Crown: https://fxairguns.com/wp-content/uplo... Dreamline Bottle Adapter: https://fxairguns.com/wp-content/uplo... O-Ring Sizes - AMP : Outer Regulator Housing - 7.5x2.0mm NBR70 Inner Regulator Housing - 4.0x1.5mm NBR70 Regulator Screw (both rings are same) - 2.0x1.0mm NBR 90 (x2) Regulator Piston - 4.0x1.5mm NBR70 Action Bore O-ring - 10.0x1.5mm NBR90 O-Ring Sizes Pre-AMP/Old Style : Outer Regulator Housing - 7.66x1.78mm NBR70 Inner Regulator Housing - 4.0x1.5mm NBR70 Regulator Screw (both rings are same) - 2.0x1.0mm NBR 90 (x2) Regulator Piston - 4.0x1.5mm NBR70 Action Bore O-ring - 9.0x1.5mm NBR90 On rare occasion, the 4.0x1.5mm NBR70 o-rings may need to be changed to a 4.1x1.6 NBR70 in order to stop a leak. This usually occurs if there is a scratch or imperfection on the sealing surface. This is only recommended as final resort. Please let me know if there are any questions about this video. Please like and subscribe, I am thankful for everyone's support! Movie Software: Movavi Video Suite 18 Music: Movavi Video Software 18 Camera (Video): GoPro Hero 7 Silver Camera (Photos): Samsung Galaxy S9 Disclaimer: Modifying or Tampering with air rifles can be very dangerous, and if done improperly, can cause serious injury and/or damage to property. Always be sure to kepp safety in mind while working on your air rifle. Also, please contact your dealer and/or manufacturer before any tampering or modifying. 910 Airgun Tuning and Repairs is not liable for any injury or damage to property due to a viewer tampering, modifying, repairing, or tuning an air rifle. If you have any questions about repairs in my videos, or if you are needing assistance with other repairs, please feel free to reach out to me, via comments below, Instagram direct message or email. If you need help with your FX Airgun, and you are located in the Western Hemisphere (North/South America), please contact FX Airguns USA for customer service, technical support, or part orders. Contact: Instagram: 910airguntuner (Link in Profile) Email: 910airguntuner@gmail.com