Tuning - FX Dreamline with Power Plenum Tuning Guide
18th Mar 2020
Quick tuning tutorial for the FX Dreamline with the Power Plenum installed! The rifle in this video is a 0.25 caliber, but the methods and techniques for tuning reflect to all calibers.
In this video, I quickly describe how, with the new plenum, you can lower your regulator to achieve your previous speeds (which provides higher shot count), or you can achieve higher speeds than before. Depending on your caliber and previous tune, you can see a 20-50 FPS increase with this plenum!
To reiterate, this was a very quick tune. If you would like a more in-depth guide on how to tune your Dreamline, please refer to my "Tuning - FX Dreamline Classic - Full Power / FAC -Tuning Tutorial" video, https://youtu.be/3FoH4oMKplA
Here is a quick list of the velocities per pellet grain weight that are suggested per caliber for the best accuracy for the Dreamline:
0.177 caliber = 900-910 FPS with 10.34gr JSB (500mm barrel)
0.22 caliber = 880-920 FPS with 18.13gr JSB (500mm barrel)
0.25 caliber = 890-920 FPS with 25.39gr JSB (600mm barrel)
0.30 caliber = 860-880 FPS with 44.75gr JSB (600mm barrel)
Also, the regulators should be at the following ranges:
0.177 caliber = 95-105 Bar
0.22 caliber = 105-115 Bar
0.25 caliber = 120-130 Bar
0.30 caliber = 130-140 Bar
**Note** Other grain weights of pellets will perform better at different velocities. The best accuracy is always up to the shooter to discover, above mentioned are just common ranges of velocities found for the best accuracy with the accompanied pellet grain weight.
As always, if you need any help with this topic, please let me know.
_________________________________________________________________________
Please let me know if there are any questions about the video. Please like and subscribe, I am thankful for everyone's support!
If you would like to support future videos: paypal.me/910AGTRLLC
I will give shout-outs to all donors! I appreciate all support!
Patreon account is finally here! If you have suggestions about pledge amounts or benefits you are looking for, please let me know! https://www.patreon.com/910AGTRLLC
Movie Software: Movavi Video Suite 18
Music: Movavi Video Suite 18
Camera (Video): Samsung Galaxy S9
Disclaimer: Modifying or Tampering with air rifles can be very dangerous, and if done improperly, can cause serious injury and/or damage to property. Always be sure to keep safety in mind while working on your air rifle. Also, please contact your dealer and/or manufacturer before any tampering or modifying. 910 Airgun Tuning and Repairs LLC is not liable for any injury or damage to property due to a viewer tampering, modifying, repairing, or tuning an air rifle. 910 Airgun Tuning and Repairs LLC does not represent FX Airguns or FX Airguns USA in these videos. FX Airguns and FX Airguns USA are not responsible for any possible liabilities from these videos.
If you have any questions about repairs in my videos, or if you are needing assistance with other repairs or a service performed on your rifle, please feel free to reach out to me, via comments below, Facebook Messenger, Instagram direct message or Email. If you need help with your FX airgun, and you are located in the Western Hemisphere (North/South America), you can also contact FX Airguns USA for customer service, technical support, or part orders.
Keep a look out on Instagram and Facebook for video announcements and other updates!
Also check out the website for tuning and repair services, refurbished airguns, custom parts, as well as DonnyFL and Saber Tactical gear!