Skip to main content

Hajimoto Tips Homemade Spinner Targets

30 June 2018 / 388 views / Hajimoto

June 30th 2018 In this video, I show you how to make heavy duty sustainable spinning targets that will not break the bank. The one thing I did not show in the video is that you must drill out the 1/4" hole at the top of the A1011 steel target from 1/4" to 17/64 or .2656. If you do not enlarge the hole they will not spin nicely once they are on the 1/4" rod as they fit too tight. Below is a list of things needed: 1/4" steel rod Home Depot 1/4" ID Vinyl Tubing 1/8" A1011 Steel Targets 1/4" x 3" lags 1/4" Flat Washers 1/4" Lock Washers Black Paint White Paint Bench Vise Hammer Large Adjustable wrench The steel dude on eBay is awesome! His name is Keith and he can make you anything from steel, he is fast and his prices are reasonable. Here is his contact info on Ebay. I bought 40 targets for 40 bucks 1/8" A1011 Steel plate. He will make whatever you want and will quote you before anything starts. https://www.ebay.com/usr/lumberjack1983 Tell him Hajimoto sent ya! I hope this video offers you some value **Airgun101.com is not responsible for any modifications suggested by any Creator. Use of these videos is entirely at your own risk.**

Show more
11111111110.00 out of 0 user(s)
00
  • Hajimoto Channel Header
Element Optics (101)
Utah Airguns
Pyramyd Air 2023
Saber Tactical (101)
Airgun Depot
Donny FL